To connect 1/2"(13-16mm) main tube to an outlet with automatic "Quick-Click®" tap fitting.

For installation into the 1/2"(13-16mm) main tube,the 1/4"(4-6mm) feeding,
tube or on fitted rigid risers.
Suitable for watering semi-circular areas.Pack of 10.

Assembly instructions

91258  360° Micro-mist sprayer

Thanks to its ergonomic design, it is easily installed by snapping it into the main hose, the feeding hose or on special stakes, should you wish to lift it above the crops. Waters an area at 360° with a cloud of mist.   

✔quality and durability

✔push fitting

✔laboratory tested

For light mist sprinkling. For installation into the 1/2" (13 - 16 mm) main tube, the 1/4" (4 - 6 mm) feeding tube, or on fitted rigid risers for overhead installation.Pack of 10.

Assembly instructions

Features:

• Pipe diameter: 1/4"
• Maximum covered area: 3 m²
• Maximum jet width (diameter): Ø 2m
• Working angle: 360°

Main tube - 50 m

1/2" (13-16 mm) polyethylene tube for the main line.

Flexible and resistant to algae formation low temperatures and solar radiation.

1/4"(4-6mm) tube for branching off the main tube.

Supplies the in-line and end-of-line drippers.

Flexible and resistant to algae formation low temperatures and solar radiation.

90371  Feeding tube - 5 m

It brings water from the main hose to the drippers or micro-sprinklers. Made with resistant, durable materials, you can cut it to size with a normal pair of scissors to create any type of drip irrigation or micro-irrigation circuit for potted plants, flower beds and vegetable gardens. Its black colour camouflages it on the ground and among the pots.

✔high quality

✔long-lasting

✔maximum flexibility

Features:

✔Pipe diameter: 1/4"

✔Hose length: 5m ()

Materials

✔hose: PE

91254  90° micro-splinker

Thanks to its ergonomic design, it is easily installed by snapping it into the main hose, the feeding hose or on special stakes, should you wish to lift it above the crops. Waters an area at 90° with a gentle, uniform rain effect.   

• quality and durability
• push fitting
• laboratory tested

Suitable for watering 90° areas. For installation into the 1/2” (13 - 16 mm) main tube, the 1/4” (4 - 6 mm) feeding tube, or on fitted rigid risers for overhead installation. Blister of 10 pcs.

Main Tube 25m

1/2"(13 - 16 mm) polyethylene tube for the main line. Flexible and resistant to algae formation, low temperatures and solar radiation. 25m coil.