













After 35 years and hundreds of thousands of customers, we know exactly what a great setup looks like. The Ultimate Package brings together expertly selected options into one ready-made configuration; the right extras, in the right combination, with no second-guessing.
19-07-2022-16-57-24.jpg?fit=pad&format=webp&q=80&w=400&h=400)



This new staging consists of an extremely sturdy aluminium frame (each piece of staging has 16 corner braces for superb rigidity). The tops are made from tanalised timber slats (pressure treated so that you never have to re-treat). Please note that we say 4' for the sake of clarity, in fact they are a bit smaller so that they fit into the greenhouses well. All Caverswall staging is delivered completely flat packed for self assembly. The height of this Staging is 770mm/2'7" high W 75cm L 113.5cm H 77cm
Saving £37.50
A 30" wide by 4' long sturdy aluminium framed staging unit (each piece of staging has 16 corner braces for superb rigidity), with three tiers of long lasting timber slatted shelves. This 30" wide staging is suitable for wider greenhouses including the Simplicity Severn, Clearance and Shrewsbury models. The 3' upper tier height makes this an ideal work bench with ample space for displaying plants and storage on the three shelves. N.B. All Caverswall staging is delivered completely flat packed for self assembly. Height of this Staging is 930mm/3'
Saving £52.50
You can improve the performance of the ventillation in your greenhouse by adding autovents. These handy devices open vents automatically and don't require batteries, working from heat alone. Also, they tend to allow the vent to open more than a conventional manual opener, equaling better ventilation.
If you require additional ventilation for your plain aluminium Simplicity greenhouse, we can supply an additional roof vent / vents. Good ventilation is essential to provide air circulation throughout the greenhouse which helps prevent fungal disease which can for example cause 'damping off' of seedlings. N.B. If you are ordering a new greenhouse the glass will be automatically adjusted to suit any additional ventilation selected.
Saving £7.20
At just 18" wide, this greenhouse staging is ideal for small greenhouses (e.g. 5' or 6' wide). The sections are 22" long and you can bolt as many together as you wish. (e.g an 8' run would be four sections bolted together and would therefore be 7'4" long- ideal to fit into an 8' gap) Made from sturdy aluminium frame with 1" deep aluminium trays. All the trays have a double folded safety edge for safety. Height: 32" / 813mm
Saving £30
Very popular, 18" wide by 9'2" long staging with sturdy aluminium legs, supporting two tiers of 1" deep aluminium trays with double folded safety edges. This staging is useful for growing and displaying plants and for storage puposes, furthermore it can be used in conjunction with capillary matting or granules to reduce watering frequency. The 18" width makes Babbington staging highly suitable for small 5' or 6' wide buildings, although of course, it can also be used in larger greenhouses. Height: 32" / 813mm
Saving £51
This mechanical device is designed to automatically open and close a louvre vent, in response to temperature. A wax-like substance, contained in the cylinder, expands with heat, operating a piston which opens the louvre via a linkage arm. As the temperature falls, the process reverses, and a spring closes the louvre. There is also an adjustment knob, which enables the opening temperature to be altered to between 15 and 25 degrees centigrade. Some simple drilling is required to fit the opener to the side of the louvre vent. Hand made by us in our Staffordshire workshop, trade enquiries welcome from all around the world This product does NOT fit the Hercules OCTAGONAL range of buildings
*Please note - stand sold separately*This waterbutt is finished in an attractive black finish and is made from durable plastic. It has a capacity of 100 litres and comes complete with a tap and a lid which has secure fit.950mm x 380mm x 380mm
Suitable for the 100l Slim Waterbutt. This stand raises the water butt high enough to be able to place a watering can below the tap. This item is essential if you don?t intend to make your own stand for your waterbutt.
Free brochure
Download our brochures now and compare every size, material and option at home. Then, if you'd like, we'll post you a printed copy, free.
Choose as many as you like. They are all free, and you can read them straight away.
2 reviews, average 4.5 out of 5 stars
Based on 2 reviews
5 star reviews
4 star reviews
3 star reviews
2 star reviews
1 star reviews
If you’ve purchased this product, share your thoughts with other customers.
5 out of 5 stars
Having opted for the "ultimate" package, with toughened glass, bar capping and other extras, I was pleased with the quality. Also happy that this comes in a 7-foot option which fitted the space I had for it. Not too hard to erect, help really only needed for the roof glass. However, the instructions were sometimes difficult to follow, with mainly pictures (rather than words) which took some figuring out. Also, though some of the bars had part numbers stamped on them, many did not, which made for a lot of measuring to get the right part. Delivery was about when expected, service excellent, and when I discovered one pane of glass missing, a quick phone call to the Greenhouse People got it delivered within a couple of days. All in all, very happy with my purchase.
November 2021
4 out of 5 stars
A well engineered frame, easy to erect. Glass fitted well too and there were several spare sheets. Only problem came with one piece that had been mis-measured in the factory and had to be cut down to fit (central door panel). I was very happy with the finished product and the level of service offered - extra frame seals provided when I ran out,no questions asked.